Proflow Fuel Cell, EFI Baffled Tank, 20 Gal (78L), Aluminium, Black, 620 x 510 x 260mm, With Sender Unit
Made from 3 mm thick AL5052-H34 aluminium alloy, Proflow’s aluminium EFI fuel cells were designed to suit in-tank fuel pump carrier systems. These fuel cells suit Proflow’s single, double and triple fuel pump carriers or any fuel pump hanger with either a 120.5 mm or 170 mm mounting circle, allowing you to get your in-tank fuel system setup quickly and easily.
They come fitted with internal baffles to prevent fuel slosh, a 0-90 ohm GM sending unit, and 2 x AN8 ORB ports for vents and return lines (if applicable). They are easily mountable with the 4 sturdy mounting brackets and are black anodised to protect against corrosive fuels such as E85 and methanol.
Note: All tanks must have a vent fitted in order to avoid pressure build-up in the tank.
Made from 3 mm thick AL5052-H34 aluminium alloy, Proflow’s aluminium EFI fuel cells were designed to suit in-tank fuel pump carrier systems. These fuel cells suit Proflow’s single, double and triple fuel pump carriers or any fuel pump hanger with either a 120.5 mm or 170 mm mounting circle, allowing you to get your in-tank fuel system setup quickly and easily.
They come fitted with internal baffles to prevent fuel slosh, a 0-90 ohm GM sending unit, and 2 x AN8 ORB ports for vents and return lines (if applicable). They are easily mountable with the 4 sturdy mounting brackets and are black anodised to protect against corrosive fuels such as E85 and methanol.
Note: All tanks must have a vent fitted in order to avoid pressure build-up in the tank.
Made from 3 mm thick AL5052-H34 aluminium alloy, Proflow’s aluminium EFI fuel cells were designed to suit in-tank fuel pump carrier systems. These fuel cells suit Proflow’s single, double and triple fuel pump carriers or any fuel pump hanger with either a 120.5 mm or 170 mm mounting circle, allowing you to get your in-tank fuel system setup quickly and easily.
They come fitted with internal baffles to prevent fuel slosh, a 0-90 ohm GM sending unit, and 2 x AN8 ORB ports for vents and return lines (if applicable). They are easily mountable with the 4 sturdy mounting brackets and are black anodised to protect against corrosive fuels such as E85 and methanol.
Note: All tanks must have a vent fitted in order to avoid pressure build-up in the tank.
